本说明书向您展示如何修理耶鲁 G807 叉车的耳轴帽。
相关内容：
2021 Yale PC Service Tool 4.97 4.92 免费下载
Hyster PC Service Tool 2021 2018 v4.97 v4.93 免费下载
程序：
1.从货叉上卸下负载并将叉车停放在水平面上。将桅杆调整到垂直位置，然后将钥匙开关转到 OFF 位置并分离电池连接器。
2. 拆下驱动桥壳上固定耳轴盖的四个有头螺钉。取下耳轴帽。
1
3. Wipe away any dirt or grease near mounting holes.Clean holes with a proper sized tap and tap wrench as necessary.
4. Position new cap over mast pin and onto transaxle.
5. Apply Loctite® 242 to threads and install four capscrews and tighten alternately in small increments.Tighten capscrews to 24 N•m (216 lbf in).
6. Grease fitting in mast stub shaft to lubricate trunnion cap.
7. Connect battery, turn key to ON position and test lift truck for proper operation.
2021 Yale PC Service Tool 4.97 Diagnostic Software Download & Installation
留言列表
